Tires are an essential part of every vehicle. A perfectly working engine is useless without them. The sad news is, even if you have made sure your tires are regularly checked up and replaced as necessary, they are still a target for misfortunes. Running over sharp or rugged objects can cause significant damage or even can bust your tires.  And driving at low speeds does not exempt you. More often than not, to do away with the unfavorable effects of having flat tires, the skill of changing them yourself is extremely important.

The truth is dealing with a flat tire is not at all hard. Being unable to call for prompt and reliable roadside tire service from a reputable roadside assistance company like Olympic Auto Recovery should not make you feel helpless. In this case, all you have to do is be equipped at all times. That means your car trunk has to have everything you will need in repairing or replacing it.

Tire Repair/Replacement 101

​Tools and Equipment
The Importance of Spare Tire – The first thing you should ever secure before commencing your trip is a spare tire. Your car should be equipped with it. Your spare tire is not supposed to replace your flat tire permanently though. All it is there for is so that you will be able to drive on to the nearest tire or auto repair shop for a dependable repair or replacement.

Next to spare tire, tools and equipment needed for a tire change service are the following:
1.      Tire Jack – For the record, without this, you will never be able to carry out any tire replacements. What this tire jack does is lift the frame of your car off the flat tire, creating enough space for the tire removal and subsequent repair or replacement.
2.      Lug Wrench – This is what you will use in loosening and removing the lug nuts from your tire frame.
3.      Screwdriver – This will assist you in prying off the hubcap to completely separate your flat tire from its frame. This tool helps you begin and end your tire replacement activity.
4.      Safety Equipment – This includes triangle signs, warning flares, lights, and your safety vest. These all are there to make you look more noticeable to the people that will drive past you on the road, thereby warning them that there is a car repair going on.
5.      You may also want to refer to your car’s manual to know which spot is best to place your tire jack. Carelessly placing it anywhere may damage your car consequently.

Practicing Safety 24/7
All roads have dangers as their constant partners. Performing any tire repair or replacement by the side, if not in the middle of it, poses a threat to safety. Hence, exercising safety precautions is something you should do as much and often as possible.  Aside from putting on your safety vest and placing the safety signs, what else should be done? Here’s a list:

1.      Move your car to a safe location. If you can’t do this, then cancel your repair or replacement, vacate and lock your car, and make sure you have all the important personal stuff with you as you leave it.
2.      Should tire repair/replacement be deemed doable, make sure you do it only on a flat surface. Otherwise, your car will obviously roll in the long run and that is like another level of danger you will be dealing with.
3.      Wedge your tires. A flat surface should not be a guarantee however. Be twice sure by wedging your tires with the help of bricks or large rocks to make sure they do not roll while you carry out the repair/replacement.

Tire Replacement – A Step by Step Guide
Now, if you have already secured all the necessary tools and equipment and followed the safety precautions and you are still not able to reach a good tow truck nearby, follow this step-by-step guide in changing your flat tire.

Once your car is in a safe location and all safety devices are placed, follow these next steps:
1.      Remove the flat tire’s hubcap. Behind it you will see the lug nuts that hold your tire in place.
2.      Loosen the lug nuts using your lug wrench. Loosen by turning the wrench counterclockwise enough   to allow them to twist off by hand.
3.      Position the jack against the frame near the flat tire (you may refer to your manual for the jack spot).
4.      Lift your car using the jack about 6 inches from the ground.
5.      Once your jack is stable and straight, proceed by removing the loosened lug nuts.
6.      Then, remove the flat tire. It will not take much effort to remove it once lugs are removed.
7.      Install your spare tire.
8.      Attach and tighten the lug nuts.
9.      Jack the car down to the ground.
10.    Finally tighten the lug nuts.
11.    Remove the jack.
12.    Reattach the hubcap. Replace when necessary.

Replacing a flat tire is not that hard but it sure requires strength and effort. If you wish to be spared all the hassle, call Olympic Auto Recovery right away. This road assistance and tow truck service company is number one at providing prompt, quality response to every driver in need. It offers. We are a trusted local tow company not just in Irvington but all throughout New Jersey for a reason.